Vorwort
apt update
apt -y upgrade
Netzwerk
DHCP entfernen:
apt remove dhcpcd5 isc-dhcp-client isc-dhcp-common
Statische Netzwerk Konfiguration:
nano /etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.11.1/16
gateway 192.168.255.254
iface eth0 inet6 static
address 2001:db8::0b01/64
gateway 2001:db8::fffe
GPIO
Wir haben an dem Status PI zwei LEDs (rot 21 und grün 5). Beim Start leuchtet die LED an GPIO 5 automatisch, dies kann wie folgt angepasst werden:
/boot/config.txt
# Set LEDs to low (off)
gpio=5=op,dl
gpio=21=op,dl
To view this entry in full, you must be a customer of Securebit AG. You can order any product from our range.
If you are already a customer, you can log in
here.