Dell PowerConnect 5548 IP-Adresse und Benutzer einrichten
**************************************************
***************** SYSTEM RESET *****************
**************************************************
Boot1 Checksum Test...............................PASS

Boot2 Checksum Test...............................PASS

Flash Image Validation Test.......................PASS



BOOT Software Version 1.0.0.14 Built 02-Apr-2012 18:41:25

##
########### ##### ###### ######
############## ######### ###### ######
############### ######### ###### ######
################ ########## #### ###### ######
################ ######### ###### ###### ######
######################## ######### ###### ######
###### ############## ######## ####### ######
###### ###################### ######### ######
###### #################### ########## ######
###### ################### ########### ######
###### ################## ############# ######
###### ################################# ######
################################################# ############
################ ################ ############# ############
################ ############## ############# ############
############### ########## ############# ############
############## ######## ############# ############
########### #### ############# ############
##


PowerConnect 5548 device with Marvell ARM CPU core. 256 MByte SDRAM.
I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.


MAC Address : d0:67:e5:d8:02:ec.

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from image-1
100%

OK
Running from RAM...

*********************************************************************
*** Running SW Ver. 4.1.0.19 Date 11-Jun-2015 Time 10:11:17 ***
*********************************************************************

HW version is 00.00.02
Base Mac address is: d0:67:e5:d8:02:ec
Dram size is : 256M bytes
Dram first block size is : 229376K bytes
Dram first PTR is : 0x1C00000
Dram second block size is : 4096K bytes
Dram second PTR is : 0xFC00000
Flash size is: 16M
01-Oct-2006 10:11:22 %CDB-I-LOADCONFIG: Loading running configuration.
01-Oct-2006 10:11:22 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - PowerConnect 5548
Device 0: GT_98DX4122 (BobCat)
Device 1: GT_98DX4123 (BobCat)

------------------------------------
-- Unit Number 1 --
------------------------------------

BobCat, Revision(A2), Cpu(800)
BobCat, Revision(A2), Cpu(800)
01-Oct-2006 10:11:38 %INIT-I-InitCompleted: Initialization task is completed


>
-----------------------------------
-- Unit Number 1 Master Enabled --
-----------------------------------

Tapi Version: v1.9.3.2
Core Version: v1.9.3.2
01-Oct-2006 10:11:43 %Fiber-I-SFP-PRESENT-CHNG: te1/0/1 SFP status is present.
01-Oct-2006 10:11:43 %Fiber-I-SFP-PRESENT-CHNG: te1/0/2 SFP status is present.
01-Oct-2006 10:11:45 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed - Fan turned OFF.
01-Oct-2006 10:11:45 %Environment-I-FAN-STAT-CHNG: FAN# 2 status changed - Fan turned OFF.
01-Oct-2006 10:11:45 %Environment-I-PS-STAT-CHNG: PS# 1 status changed - operational.
01-Oct-2006 10:11:45 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration change trap.
01-Oct-2006 10:11:45 %MLDP-I-MASTER: Switching to the Master Mode.
01-Oct-2006 10:11:45 %Stack-I-STCK-CFG-CHNG: Configuration changed: chain
01-Oct-2006 10:11:45 %SNMP-I-CDBITEMSNUM: Number of running configuration items loaded: 0

01-Oct-2006 10:11:45 %SNMP-I-CDBITEMSNUM: Number of startup configuration items loaded: 0

>lcli
01-Oct-2006 10:11:46 %LINK-W-Down: gi1/0/1
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/2
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/3
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/4
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/5
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/6
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/7
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/8
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/9
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/10
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/11
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/12
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/13
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/14
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/15
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/16
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/17
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/18
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/19
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/20
01-Oct-2006 10:11:47 %LINK-W-Down: gi1/0/21
01-Oct-2006 10:11:48 %LINK-W-Down: gi1/0/22
01-Oct-2006 10:11:48 %LINK-W-Down: gi1/0/23
01-Oct-2006 10:11:48 %LINK-W-Down: gi1/0/24



Welcome to Dell Easy Setup Wizard.

The Setup Wizard guides you through the initial switch configuration, and gets
you up and running as quickly as possible. You can skip the setup wizard, and
enter CLI mode to manually configure the switch.
The system will prompt you with a default answer; by pressing enter, you accept
the default.
You must respond to the next question to run the setup wizard within
60 seconds, otherwise the system will continue with normal operation using
the default system configuration.

Would you like to enter the setup wizard (you must answer this question within
60 seconds)? (Y/N)[Y] N

To view this entry in full, you must be a customer of Securebit AG. You can order any product from our range.

If you are already a customer, you can log in here.